New Painted Staircase Spindles

Jul 21st

Staircase spindles – Painted spindles add a nice touch to a staircase. But if the color painted does not match your decor, you may consider adding some personality. There are two ways to go about redoing the spindles. The quick way, if you want a weekend DIY project. Is to simply clean, prime and paint the spindles. This will give you quick results, but the wood grain and texture will not show through. And then paint may appear coarse plastered. To do the job well, you’re going to need some elbow grease and a lot of patience.

Staircase Spindles Wood
Staircase Spindles Wood

How to paint staircase spindles?┬áThe first, sand paints the shafts using an orbital sander. Sixty sanding paper will remove the paint. After all the paint is off, sand again with the 120. And then the 220 grains for a smooth finish. You’ll want a small orbital sander for this project with a tip to fit any detail work carved into the shafts.

12 Photos Gallery of: New Painted Staircase Spindles

Image of: Staircase Spindles Black
Image of: Staircase Spindles Designs
Image of: Staircase Spindles Home
Image of: Staircase Spindles Ideas
Image of: Staircase Spindles Indoor
Image of: Staircase Spindles Iron
Image of: Staircase Spindles Models
Image of: Staircase Spindles Oak
Image of: Staircase Spindles Paint
Image of: Staircase Spindles Shapes
Image of: Staircase Spindles White
Image of: Staircase Spindles Wood
 

Then, RUB down the axles down with a dust block to remove dust and vacuum from the room to remove dust from the floor. Coat each shaft with a primer coat and allow the primer to dry completely. Coat the staircase spindles with two layers of your desired paint color, allowing the paint to dry between layers.

Leave a Reply