Sliding barn door track – can add a realistic look at a work shed or barn. The backbone of these doors the track and the roles that bind the doors to the building and slip free. Most people can install tracks and rollers for barn doors in a few hours. Double the measured width of the door opening in order to determine the required length of the track. Cut the path to the required length using a hacksaw or reciprocating-saw fitted with a metal blade.
Optimum style installation of the sliding barn door track. It will both montage with clips that come with the track-kit by screws or by tabs which are welded to the top of the track. If clips are used, simply slide them on the trail of the ends and evenly. Mount the rail to the wall using the screws provided with the bottom of the track three inches above the top of the doorway. Make sure the track is level. Choose which side of the opening of the door will slide mount and flush with the rail to the other side.
12 Photos Gallery of: How to Install & Sliding Barn Door Track
Flat door face down and place the rolls one to two inches below the top of the sliding barn door track. Begin with by the placing of roll six inches in each side and the rest evenly distribute between them. Using a pencil to mark and remove the screw holes of the rollers. Bore a hole in the door on each brand, with the aid of a drill which is as wide as the screw holes. Put the carriage bolts that came with the rollers of the front side of the door and by the rollers on the back of the door.