How to Build a Sliding Barn Door

Sep 10th

How to build a sliding barn door – Barn style doors have a timeless charm, they are attached to an old red barn, shed or open the back door. A barn door style is simple in design, but strong. If you like the look of a barn door, functional country-style, to build one yourself. Use wood salvaged from an old barn or wood that matches the aesthetics of your home. A style barn door gives a small building or home, a warm and picturesque entrance.

How to Build a Sliding Barn Door
How to Build a Sliding Barn Door

How to build a sliding barn door, measure the length and width of your door. Subtract 1/4 inch in width and 1/2 inch in length to allow opening the door properly. Cut the board 1-by-6 two wooden pieces which measure the width of the door. These will be the top and bottom of the door.

12 Photos Gallery of: How to Build a Sliding Barn Door

Image of: How to Build a Sliding Barn Door Bedroom
Image of: How to Build a Slidsaing Barn Door Decorative
Image of: How to Build a Sliding Barn Door Diy
Image of: How to Build a Sliding Barn Door Elegant
Image of: How to Build a Sliding Barn Door Garage
Image of: How to Build a Sliding Barn Door Ideas
Image of: How to Build a Sliding Barn Door Inspired
Image of: How to Build a Sliding Barn Door Instructions
Image of: How to Build a Sliding Barn Door Modular
Image of: How to Build a Sliding Barn Door Perfect
Image of: How to Build a Sliding Barn Door Plan
Image of: How to Build a Sliding Barn Door
 

How to build a sliding barn door, ask the two cut pieces of wood on the ground, spaced to match the extent of the door. Measuring the distance between the upper and lower blades. Use this length to cut three boards 1-in-12 to fit between the top and bottom pieces. Place cut side 1 per 12 side boards between the top and bottom 1-by-6s. If the 1-in-12 is wider than the parts of the upper and lower, you’ll need to reduce the width of each as 1-in-12.

Leave a Reply