Wainscot Paneling – Install coatings wood paneling, wainscoting either flanged, recessed or raised, can add elegance to a room of yesteryear. Inventory materials and the simple process described below, you can install wood siding panels and create that style in much less time and with much less money. To install wood paneling coatings, I began establishing a work area where create enough space to work.
As there were a large number of holes to drill and concealment frames wainscot paneling long arm, I used a long work table on trestles or ground work. You can work on the floor if necessary, but the table allows you to use a guide to keep Material Square (two joined boards with nails at the exact angle relative to the other). After applying a layer of primer base and cut the plywood board of ⅛ inch to the right width, nail it to the wall with finish nails 1½ inches above the bottom edge. Make sure that any joints are hidden under the posts.
12 Photos Gallery of: Best Choosing Wainscot Paneling
Start putting together the longest frame first, because you can more easily make adjustments to the smaller frames of the shorter wainscot paneling walls. Previously cut a large number of posts, and if your walls are longer than their longer boards, planning boards splicing so that fall on a bra and make sure the seal top does not fall into the same panel below the board. Connect the frame with adhesive and screws concealment.